The influence of polyimide MP-1™ wear particles on a rodent closed fracture healing model.

Joint replacements provide pain free movement for the injured or our aging population. Current prothesis mainly consist of hard metal on metal, or ceramic femoral head on ultra-high-molecular weight polyethylene (UHMWPE). In this study, a rodent fracture model was used to test the influence of wear debris from a high-performance polymer (polyimide MP-1™). Saline, MP-1™ Low Dose in Saline (1%), or MP-1 High Dose (2%) in Saline was injected directly into a standard closed unilateral femoral fracture in 12-week old Sprague Dawley rats (n = 25) for 1, 3 and 6 weeks. Endpoints included radiography, micro-computed tomography, mechanical testing and paraffin histology. No adverse effects from the wear particles were observed from the current study based on radiology, mechanical or histological data. Although the particles were present, histological analysis revealed a progression in healing between the Polyimide treated groups and the non-treated saline control groups over the duration of 1, 3, and 6 weeks, with no inhibition from the particles. The MP-1™ wear debris generated are larger than 1 µm thus are not able to be engulfed by macrophages and cause osteolysis. This family of polymers (polyimides) may be an ideal material to consider for articulating joints and other implants in the human body.

Porous Cage Macro-Topography Improves Early Fusion Rates in Anterior Cervical Discectomy and Fusion.

Objectives: Anterior cervical discectomy and fusion (ACDF) aims to improve pain, relieve neural compression, achieve rapid solid bony arthrodesis, and restore cervical alignment. Bony fusion occurs as early as 3 months and up to 24 months after ACDF. The correlations between bony fusion and clinical outcomes after ACDF remain unclear. Macro-topographic and porous features have been introduced to interbody cage technology, aiming to improve the strength of the bone-implant interface to promote early fusion. In this study, we aimed to compare clinical outcomes and CT-evaluated fusion rates in patients undergoing ACDF using one of two different interbody cages: traditional NanoMetalene™ (NM) cages and NM cages with machined porous features (NMRT). Methods: This was a prospective, observational, nonrandomised, cohort study of consecutive patients undergoing ACDF. The NM cage cohort was enrolled first, then the NMRT cohort second. The visual analogue scale, neck disability index, and 12-item Short Form Survey scores were evaluated preoperatively and at 6 weeks, 3 months, and 6 months. The minimum clinical follow-up period was 12 months. Plain radiographs were obtained on postoperative day 2 to assess instrumentation positioning, and computed tomography (CT) was performed at 3 and 6 months postoperatively to assess interbody fusion (Bridwell grade). Results: Eighty-nine (52% male) patients with a mean age of 62 ± 10.5 years were included in this study. Forty-one patients received NM cages, and 48 received NMRT cages. All clinical outcomes improved significantly from baseline to 6 months. By 3 months, the NMRT group had significantly higher CT fusion rates than the NM group (79% vs 56%, p=0.02). By 6 months, there were no significant differences in fusion rates between the NMRT and NM groups (83% vs 78%, p=0.69). The mean Bridwell grade at 6 months was 1.4 ± 0.7 in the NMRT group and 1.8 ± 1.0 in the NM group (p=0.08). Conclusions: With both NM and NMRT cages, serial improvements in postoperative clinical outcomes were associated with fusion progression on CT. NMRT cages demonstrated significantly better fusion at 3 months and a trend toward higher quality of fusion at 6 months compared with NM cages, suggesting earlier cage integration with NMRT. An early 3-month postoperative CT is adequate for fusion assessment in almost 80% of patients undergoing ACDF with an NMRT cage, permitting an earlier return to activity.

Anterior cruciate ligament zoobiquity: Can man's best friend tell us we are being too cautious with the implementation of osteotomy to correct posterior tibial slope.

Anterior cruciate ligament (ACL) reconstruction (ACLR) is used to treat clinical instability post ACL rupture, however, there is a high rate of incomplete return to sport and rerupture. There is increasing interest in posterior tibial slope as an intrinsic risk factor for ACLR failure and persistent instability. Zoobiquity describes the collaboration between the human and veterinary professions in order to advance the scientific understanding of both fields. Given the cranial cruciate ligament (CCL) in dogs is synonymous with the anterior cruciate ligament in humans, functioning to control internal rotation and anterior translation, but osteotomies, rather than ligament reconstruction, are the mainstay of treatment for CCL rupture, this editorial sort to gain insights into this form of treatment from the veterinary world. Level of Evidence: Level V, evidence.

Lateral fenestration of lumbar intervertebral discs in rabbits: development and characterisation of an in vivo preclinical model with multi-modal endpoint analysis.

PURPOSE: To evaluate the biological and biomechanical effects of fenestration/microdiscectomy in an in vivo rabbit model, and in doing so, create a preclinical animal model of IVDD. METHODS: Lateral lumbar IVD fenestration was performed in vivo as single- (L3/4; n = 12) and multi-level (L2/3, L3/4, L4/5; n = 12) fenestration in skeletally mature 6-month-old New Zealand White rabbits. Radiographic, micro-CT, micro-MRI, non-destructive robotic range of motion, and histological evaluations were performed 6- and 12-weeks postoperatively. Independent t tests, one-way and two-way ANOVA and Kruskal-Wallis tests were used for parametric and nonparametric data, respectively. Statistical significance was set at P < 0.05. RESULTS: All rabbits recovered uneventfully from surgery and ambulated normally. Radiographs and micro-CT demonstrated marked reactive proliferative osseous changes and endplate sclerosis at fenestrated IVDs. Range of motion at the fenestrated disc space was significantly reduced compared to intact controls at 6- and 12-weeks postoperatively (P < 0.05). Mean disc height index percentage for fenestrated IVDs was significantly lower than adjacent, non-operated IVDs for both single and multi-level groups, at 6 and 12 weeks (P < 0.001). Pfirrmann MRI IVDD and histological grading scores were significantly higher for fenestrated IVDs compared to non-operated adjacent and age-matched control IVDs for single and multi-level groups at 6 and 12 weeks (P < 0.001). CONCLUSIONS: Fenestration, akin to microdiscectomy, demonstrated significant biological, and biomechanical effects in this in vivo rabbit model and warrants consideration by veterinary and human spine surgeons. This described model may be suitable for preclinical in vivo evaluation of therapeutic strategies for IVDD in veterinary and human patients.

Effect of gamma irradiation and supercritical carbon dioxide sterilization with Novakill™ or ethanol on the fracture toughness of cortical bone.

Sterilization of structural bone allografts is a critical process prior to their clinical use in large cortical bone defects. Gamma irradiation protocols are known to affect tissue integrity in a dose dependent manner. Alternative sterilization treatments, such as supercritical carbon dioxide (SCCO2 ), are gaining popularity due to advantages such as minimal exposure to denaturants, the lack of toxic residues, superior tissue penetration, and minor impacts on mechanical properties including strength and stiffness. The impact of SCCO2 on the fracture toughness of bone tissue, however, remains unknown. Here, we evaluate crack initiation and growth toughness after 2, 6, and 24 h SCCO2 -treatment using Novakill™ and ethanol as additives on ~11 samples per group obtained from a pair of femur diaphyses of a canine. All mechanical testing was performed at ambient air after 24 h soaking in Hanks' balanced salt solution (HBSS). Results show no statistically significant difference in the failure characteristics of the Novakill™-treated groups whereas crack growth toughness after 6 and 24 h of treatment with ethanol significantly increases by 37% (p = .010) and 34% (p = .038), respectively, compared to an untreated control group. In contrast, standard 25 kGy gamma irradiation causes significantly reduced crack growth resistance by 40% (p = .007) compared to untreated bone. FTIR vibrational spectroscopy, conducted after testing, reveals a consistent trend of statistically significant differences (p < .001) with fracture toughness. These trends align with variations in the ratios of enzymatic mature to immature crosslinks in the collagen structure, suggesting a potential association with fracture toughness. Additional Raman spectroscopy after testing shows a similar trend with statistically significant differences (p < .005), which further supports that collagen structural changes occur in the SCF-treated groups with ethanol after 6 and 24 h. Our work reveals the benefits of SCCO2 sterilization compared to gamma irradiation.

Comparison of three methods for nucleus pulposus volume measurement in rabbit lumbar spines: a preclinical model for measurement of the effectiveness of prophylactic intervertebral disk fenestration in dogs.

OBJECTIVE: Compare 3 methods of nucleus pulposus (NP) volume measurement using the rabbit lumbar spines as a preclinical model to determine the effectiveness of prophylactic intervertebral disk fenestration in dogs. ANIMALS: Twelve 9-month-old, skeletally mature female entire New Zealand White rabbits weighing between 3.5 to 4.5 kg. METHODS: NP volume measurements of dissected rabbit lumber spines between L1 and L6 were made and compared using gross measurements, reconstructed MRI images, and water volumetry based on Archimedes' principle. Water volumetry was used as the true gold standard volume measurement in this study. RESULTS: The true volume (mean ± SD) of the nucleus pulposus NP as measured by water volumetry increased caudally from L1/L2 (16.26 ± 3.32 mm3) to L5/L6 (22.73 ± 6.09 mm3). Volume estimates made by MRI were significantly higher than those made using water volumetry at all sites (L1/L2 [P = .044], L2/L3 [P = .012], L3/L4 [P = .015], L4/L5 [P < .001], and L5/L6 [P < .001]). Gross measurements also significantly overestimated volume when compared to water volumetry at all sites; L1/L2 (P = .021), L2/L3 (P = .025), L3/L4 (P = .001), L4/L5 (P < .001), and L5/L6 (P < .001). MRI and gross volume estimates were significantly different at L4/L5 (P = .035) and L5/L6 (P = .030). CLINICAL RELEVANCE: The findings of this preclinical model might be relevant to veterinary surgeons who perform prophylactic fenestration for which there is no reliable method to determine the amount of NP to be removed. Preclinical ex vivo and in vivo fenestration studies with pre- and postoperative NP volume assessment are required.

Antimicrobial Peptidomimetics Prevent the Development of Resistance against Gentamicin and Ciprofloxacin in Staphylococcus and Pseudomonas Bacteria.

Bacteria readily acquire resistance to traditional antibiotics, resulting in pan-resistant strains with no available treatment. Antimicrobial resistance is a global challenge and without the development of effective antimicrobials, the foundation of modern medicine is at risk. Combination therapies such as antibiotic-antibiotic and antibiotic-adjuvant combinations are strategies used to combat antibiotic resistance. Current research focuses on antimicrobial peptidomimetics as adjuvant compounds, due to their promising activity against antibiotic-resistant bacteria. Here, for the first time we demonstrate that antibiotic-peptidomimetic combinations mitigate the development of antibiotic resistance in Staphylococcus aureus and Pseudomonas aeruginosa. When ciprofloxacin and gentamicin were passaged individually at sub-inhibitory concentrations for 10 days, the minimum inhibitory concentrations (MICs) increased up to 32-fold and 128-fold for S. aureus and P. aeruginosa, respectively. In contrast, when antibiotics were passaged in combination with peptidomimetics (Melimine, Mel4, RK758), the MICs of both antibiotics and peptidomimetics remained constant, indicating these combinations were able to mitigate the development of antibiotic-resistance. Furthermore, antibiotic-peptidomimetic combinations demonstrated synergistic activity against both Gram-positive and Gram-negative bacteria, reducing the concentration needed for bactericidal activity. This has significant potential clinical applications-including preventing the spread of antibiotic-resistant strains in hospitals and communities, reviving ineffective antibiotics, and lowering the toxicity of antimicrobial chemotherapy.

Biomechanical Comparison of Cortical Lag Screws and Cortical Position Screws for Their Generation of Interfragmentary Compression and Area of Compression in Simulated Lateral Humeral Condylar Fractures.

OBJECTIVE: The aim of this study was to compare the interfragmentary compressive force and area of compression generated by cortical screws inserted as either a lag screw or position screw in simulated lateral humeral condylar fractures. STUDY DESIGN: Ex vivo biomechanical study. MATERIALS AND METHODS: Thirteen pairs of cadaveric humeri from skeletally mature Merinos with simulated lateral humeral condylar fractures were used. Pressure sensitive film was inserted into the interfragmentary interface prior to fracture reduction with fragment forceps. A cortical screw was inserted as a lag screw or a position screw and tightened to 1.8Nm. Interfragmentary compression and area of compression were quantified and compared between the two treatments groups at three time points. RESULTS: After fracture reduction using fragment forceps (Time point 1: T1), there was no significant difference in interfragmentary compression and area of compression between the two treatments. A combination of fragment forceps and a cortical screw inserted as a lag screw (Time point 2: T2) produced significantly greater interfragmentary compression and area of compression compared with the same screw inserted as a positional screw. After removal of the fragment forceps, leaving only the cortical screw (Time point 3: T3), both the interfragmentary compression and area of compression remain significantly greater in the lag screw group. CONCLUSION: Lag screws generate a greater force of compression and area of compression compared with position screws in this mature ovine humeral condylar fracture model.

Knotless Tendon Repair with a Resorbable Barbed Suture: An In-vivo Comparison in the Turkey Foot.

Background: Un-knotted barbed suture constructs are postulated to decrease repair bulk and improve tension loading along the entire repair site resulting in beneficial biomechanical repair properties. Applying this repair technique to tendons has shown good results in ex-vivo experiments previously but thus far no in-vivo study could confirm these. Therefore, this current study was conducted to assess the value of un-knotted barbed suture repairs in the primary repair of flexor tendons in an in-vivo setting. Methods: Two groups of 10 turkeys (Meleagris gallapovos) were used. All turkeys underwent surgical zone II flexor tendon laceration repairs. In group one, tendons were repaired using a traditional four-strand cross-locked cruciate (Adelaide) repair, while in group two, a four-strand knotless barbed suture 3D repair was used. Postoperatively repaired digits were casted in functional position, and animals were left free to mobilise and full weight bear, resembling a high-tension post-op rehabilitation protocol. Surgeries and rehabilitations went uneventful and no major complications were noted. The turkeys were monitored for 6 weeks before the repairs were re-examined and assessed against several outcomes, such as failure rate, repair bulk, range of motion, adhesion formation and biomechanical stability. Results: In this high-tension in-vivo tendon repair experiment, traditionally repaired tendons performed significantly better when comparing absolute failure rates and repair stability after 6 weeks. Nevertheless, the knotless barbed suture repairs that remained intact demonstrated benefits in all other outcome measures, including repair bulk, range of motion, adhesion formation and operating time. Conclusions: Previously demonstrated ex-vivo benefits of flexor tendon repairs with resorbable barbed sutures may not be applicable in an in-vivo setting due to significant difference in repair stability and failure rates. Level of Evidence: Level IV (Therapeutic).

Autograft Cellular Contribution to Spinal Fusion and Effects of Intraoperative Storage Conditions.

STUDY DESIGN: Controlled animal study. OBJECTIVE: To assess the cellular contribution of autograft to spinal fusion and determine the effects of intraoperative storage conditions on fusion. SUMMARY OF BACKGROUND DATA: Autograft is considered the gold standard graft material in spinal fusion, purportedly due to its osteogenic properties. Autograft consists of adherent and non-adherent cellular components within a cancellous bone scaffold. However, neither the contribution of each component to bone healing is well understood nor are the effects of intraoperative storage of autograft. MATERIALS AND METHODS: Posterolateral spinal fusion was performed in 48 rabbits. Autograft groups evaluated included: (1) Viable, (2) partially devitalized, (3) devitalized, (4) dried, and (5) hydrated iliac crest. Partially devitalized and devitalized grafts were rinsed with saline, removing nonadherent cells. Devitalized graft was, in addition, freeze/thawed, lysing adherent cells. For 90 minutes before implantation, air dried iliac crest was left on the back table whereas the hydrated iliac crest was immersed in saline. At 8 weeks, fusion was assessed through manual palpation, radiography, and microcomputed tomography. In addition, the cellular viability of cancellous bone was assayed over 4 hours. RESULTS: Spinal fusion rates by manual palpation were not statistically different between viable (58%) and partially devitalized (86%) autografts ( P = 0.19). Both rates were significantly higher than devitalized and dried autograft (both 0%, P < 0.001). In vitro bone cell viability was reduced by 37% after 1 hour and by 63% after 4 hours when the bone was left dry ( P < 0.001). Bone cell viability and fusion performance (88%, P < 0.001 vs . dried autograft) were maintained when the graft was stored in saline. CONCLUSIONS: The cellular component of autograft is important for spinal fusion. Adherent graft cells seem to be the more important cellular component in the rabbit model. Autograft left dry on the back table showed a rapid decline in cell viability and fusion but was maintained with storage in saline.

Preclinical in vivo animal models of intervertebral disc degeneration. Part 1: A systematic review.

Intervertebral disc degeneration (IVDD), a widely recognized cause of lower back pain, is the leading cause of disability worldwide. A myriad of preclinical in vivo animal models of IVDD have been described in the literature. There is a need for critical evaluation of these models to better inform researchers and clinicians to optimize study design and ultimately, enhance experimental outcomes. The purpose of this study was to conduct an extensive systematic literature review to report the variability of animal species, IVDD induction method, and experimental timepoints and endpoints used in in vivo IVDD preclinical research. A systematic literature review of peer-reviewed manuscripts featured on PubMed and EMBASE databases was conducted in accordance with PRISMA guidelines. Studies were included if they reported an in vivo animal model of IVDD and included details of the species used, how disc degeneration was induced, and the experimental endpoints used for analysis. Two-hundred and fifty-nine (259) studies were reviewed. The most common species, IVDD induction method and experimental endpoint used was rodents(140/259, 54.05%), surgery (168/259, 64.86%) and histology (217/259, 83.78%), respectively. Experimental timepoint varied greatly between studies, ranging from 1 week (dog and rodent models), to >104 weeks in dog, horse, monkey, rabbit, and sheep models. The two most common timepoints used across all species were 4 weeks (49 manuscripts) and 12 weeks (44 manuscripts). A comprehensive discussion of the species, methods of IVDD induction and experimental endpoints is presented. There was great variability across all categories: animal species, method of IVDD induction, timepoints and experimental endpoints. While no animal model can replicate the human scenario, the most appropriate model should be selected in line with the study objectives to optimize experimental design, outcomes and improve comparisons between studies.

Anatomy of the distal radioulnar ligament in cats.

OBJECTIVES: The aim of this study was to describe the anatomy of the distal radioulnar ligament in the cat, using gross and histological sections from cadaveric feline carpi. METHODS: Eight feline cadaveric distal radioulnar joints were included in the study, including six that were paraffin- and two that were polymethyl methacrylate-embedded. Each of the sections of the distal radioulnar joint and ligament were viewed macroscopically and microscopically using a dissection microscope and a standard light microscope with polarising capacity. RESULTS: On gross examination, the distal radioulnar ligament could be seen as a triangular-shaped structure extending between the dorsal surface of the distal radius and ulna. The centre of the ligament had a greater density of tightly packed collagen fibres, while fibrocartilage was identified at the site of both the radial and ulnar entheses. Articular cartilage was noted to extend to the most proximal part of the bulbous portion of the distal ulna and corresponding axial aspect of the distal radius. CONCLUSIONS AND RELEVANCE: In the cat, there appears to be a less extensive interosseous component of the distal radioulnar ligament compared with the dog and cheetah. Instead, the ligament follows the articular surfaces of the distal radius and ulna. These anatomical differences may account for increased rotation of the feline antebrachium and have clinical implications, particularly with regard to the management of antebrachiocarpal joint injuries.

The Effect of Location of a Unicortical Defect on the Mechanical Properties of Rabbit Tibiae: A Model of the Distal Jig Pin Hole in Tibial Plateau Levelling Osteotomy.

OBJECTIVE: The aim of this study was to determine the effect of a unicortical defect at either the mid-diaphysis (MD) or distal metaphysis (DM) on the torsional properties of tibiae in an in vitro rabbit model, and to further examine optimal distal jig pin position for the canine tibial plateau levelling osteotomy (TPLO) procedure. STUDY DESIGN: Thirty-eight tibiae from 19 skeletally mature female New Zealand White rabbits were assigned to one of three groups; Group 1: intact, Group 2: MD defect and Group 3: DM defect. Defects were created using a 1.6 mm Ellis pin. Pure torsion was applied to each sample and peak torque and angular displacement recorded. RESULTS: All tibiae fractured in a spiral configuration. Fracture lines involved the defect in 33% of the MD samples and 0% of the DM samples. No differences were detected for peak torque and stiffness between groups. However, energy (mean ± standard deviation) was significantly reduced (p = 0.028) in the MD group (0.18 ± 0.07) relative to the intact tibia group (0.31 ± 0.14). Angle was also significantly reduced (p = 0.040) in the MD group (0.17 ± 0.05) compared with the intact group (0.23 ± 0.07). Placement of a DM defect had no significant effect on mechanical properties of the rabbit tibiae. CONCLUSION: Defects placed in the MD significantly reduced energy and angle in comparison to intact samples. No significant difference in peak torque or stiffness was observed between groups. If canine tibiae were similarly affected, our findings suggest jig pin placement in the DM to have a lesser effect on the torsional properties of the tibiae.

Vacuum-Sealed Hot Water Bath Immersion for the Preparation of Anatomical and Surgical Cadaveric Bone Models.

Bone models serve many purposes, including improving anatomical understanding, preoperative surgical planning, and intraoperative referencing. Several techniques for the maceration of soft tissues have been described, mainly for forensic analysis. For clinical research and medical use, these methods have been superseded by three-dimensional (3D) printed models, which require substantial equipment and expertise, and are costly. Here, cadaveric sheep vertebral bone was cleaned by vacuum sealing the specimen with commercial dishwashing detergent, immersing in a hot water bath, and subsequently manually removing the soft tissue. This eliminated the disadvantages of the previously existing maceration methods, such as the existence of foul odors, usage of hazardous chemicals, substantial equipment, and high costs. The described technique produced clean, dry samples while maintaining anatomical detail and structure to accurately model the osseous structures that can be useful for preoperative planning and intraoperative referencing. The method is simple, low-cost, and effective for bone model preparation for education and surgical planning in veterinary and human medicine.

The Intra- and Inter-Rater Reliability of a Variety of Testing Methods to Measure Shoulder Range of Motion, Hand-behind-Back and External Rotation Strength in Healthy Participants.

This study determined the intra- and inter-rater reliability of various shoulder testing methods to measure flexion range of motion (ROM), hand-behind-back (HBB), and external rotation (ER) strength. Twenty-four healthy adults (mean age of 31.2 and standard deviation (SD) of 10.9 years) without shoulder or neck pathology were assessed by two examiners using standardised testing protocols to measure shoulder flexion with still photography, HBB with tape measure, and isometric ER strength in two abduction positions with a hand-held dynamometer (HHD) and novel stabilisation device. Intraclass correlation coefficient (ICC) established relative reliability. Standard error of measurement (SEM) and minimum detectable change (MDC) established absolute reliability. Differences between raters were visualised with Bland-Altman plots. A paired t-test assessed for differences between dominant and non-dominant sides. Still photography demonstrated good intra- and inter-rater reliability (ICCs 0.75-0.86). HBB with tape measure demonstrated excellent inter- and intra-rater reliability (ICCs 0.94-0.98). Isometric ER strength with HHD and a stabilisation device demonstrated excellent intra-rater and inter-rater reliability in 30° and 45° abduction (ICCs 0.96-0.98). HBB and isometric ER at 45° abduction differed significantly between dominant and non-dominant sides. Standardised shoulder ROM and strength tests provide good to excellent reliability. HBB with tape measure and isometric strength testing with HHD stabilisation are clinically acceptable.

Cyclic Testing of a Modified Pull-Out Suture Repair Technique for Flexor Digitorum Profundus Avulsion in a Turkey Foot Model.

Background: Numerous repair techniques have been described for closed flexor digitorum profundus (FDP) avulsion. One option is a pull-out suture tied over the nail plate (Bunnell repair). We modified the Bunnell repair by incorporating a portion of the distal interphalangeal (DIP) joint volar plate into the repair to improve strength and reduce gapping. The aim of this study is to compare gap formation and load to failure between the Bunnell repair and our modification in a turkey foot model. Methods: Twenty-four fresh-frozen cadaveric turkey feet were divided into two repair groups namely the conventional Bunnell pull-out suture technique and the modified Bunnell pull-out suture technique, incorporating the middle-third of the DIP joint volar plate into the repair. Both repairs were carried out with 3-0 prolene suture and underwent ex-vivo cyclic loading at 2-12 n in a sinusoidal wave for 100 cycles to simulate a passive range of motion (ROM) protocol. Subsequently, specimens were loaded to failure at 12 mm/minute. Gap formation and load to failure were measured. Results: No repair ruptures occurred during cyclical testing. Mean gap formation was 9.2 mm (±1.49) in the Bunnell repair, and 3.5 mm (±1.19) in the modified Bunnell repair (p < 0.0001). The mean load to failure for the Bunnell repair was 35.4 n compared to 45 n for the modified repair (p = 0.0017). Conclusions: Gap formation was reduced and load to failure increased by augmenting the Bunnell pull-out suture repair with the central portion of the DIP joint volar plate.

Characterization of costal cartilage allografts.

BACKGROUND: Human costal cartilage remains widely used in the reconstruction of soft tissues, particularly within the field of plastic and orthopaedic surgery. The biologic expense of using autologous human costal cartilage has become superseded by the increasingly common use of irradiated costal cartilage allografts. To date, there has been no histologic investigation of such costal cartilage allografts. This study aims to characterize the histologic variations that exist between different costal cartilage specimens, and to quantify this between specimens in spite of their common anatomical derivation. METHODS: Twenty-five specimens of cadaveric human costal cartilage were obtained from Australian Biotechnologies. Each specimen was irradiated, sectioned and stained with Haematoxylin and Eosin, Masson's trichrome and tetrachrome stains. After being analysed under light microscopy, specimen dimensions, chondrocyte counts and mineral content was quantified and measured. RESULTS: The median specimen diameter was 8.20 mm, with an interquartile range (IQR) of 1.59 mm. The median measurement from the superficial to basal chondrocyte layer was 1409.91 µm (IQR = 885.59 µm), and the median measurement from superficial to calcified zone was 4146.26 µm (IQR 1441.83 µm). The median chondrocyte area was 442.74 µm2 (IQR = 2622.72 µm2 ) with their total chondrocyte count ranging from 289 to 591 chondrocytes per square millimetre. The median percentages of collagen and mineral content were 45.17% and 71.82%, respectively (IQR = 20.48%, 14.75%). CONCLUSION: These findings emphasize the histologic and biochemical degree of variation that exists between specimens of human cadaveric costal cartilage on a microscopic level. This has the potential to influence the selection of costal cartilage allografts for reconstructive purposes.

Corrosion Resistance of 3D Printed Ti6Al4V Gyroid Lattices with Varying Porosity.

Corrosion of medical implants is a possible failure mode via induced local inflammatory effects, systemic deposition and corrosion related mechanical failure. Cyclic potentiodynamic polarisation (CPP) testing was utilized to evaluate the effect of increased porosity (60% and 80%) and decreased wall thickness in gyroid lattice structures on the electrochemical behaviour of LPBF Ti6Al4V structures. The use of CPP allowed for the landmarks of breakdown potential, resting potential and vertex potential to be analysed, as well as facilitating the construction of Tafel plots and qualitative Goldberg analysis. The results indicated that 60% gyroid samples were most susceptible to the onset of pitting corrosion when compared to 80% gyroid and solid samples. This was shown through decreased breakdown and vertex potentials and were found to correlate to increased lattice surface area to void volume ratio. Tafel plots indicated that despite the earlier onset of pitting corrosion, both gyroid test groups displayed lower rates of corrosion per year, indicating a lower severity of corrosion. This study highlighted inherent tradeoffs between lattice optimisation and corrosion behaviour with a potential parabolic link between void volume, surface area and corrosion being identified. This potential link is supported by 60% gyroid samples having the lowest breakdown potentials, but investigation into other porosity ranges is suggested to support the hypothesis. All 3D printed materials studied here showed breakdown potentials higher than ASTM F2129's suggestion of 800 mV for evaluation within the physiological environment, indicating that under static conditions pitting and crevice corrosion should not initiate within the body.

'SMART' implantable devices for spinal implants: a systematic review on current and future trends.

Background: 'SMART' implants refer to modified orthopedic implants that combine the biomechanical safety and efficacy of traditional devices with the intelligence of data-logging sensors. This review aims to systematically assess the available literature on SMART spinal implants and present these findings in a clinically relevant manner. Methods: A search of PubMed, Scopus, and Google Scholar databases was conducted by two separate reviewers. Information including sensor type, intended application, and sample size, was extracted from included studies. Risk of bias assessment was conducted using the Office of Health Assessment and Translation (OHAT) risk of bias tool. Results: Eighteen studies were included for analysis. Eight studies involved SMART rods and ten studies used SMART vertebral body replacements (VBR). No more than 20 patients are reported to have received a SMART spinal implant. Including non-primary evidence, seven unique designs for SMART spinal implants were found. The majority of these used strain gauges with recent designs including thermometers and accelerometers. Discussion: At present, SMART spinal implants have primarily focused on utilising strain gauges to report loading on the implant itself. This is a logical first step as it allows quantification of real-world requirements of an implant, detection of catastrophic failure, while also allowing researchers and clinicians to estimate changes in load sharing between newly forming bone and the implant itself, providing real-time information on the progression of healing and fusion. Future work includes documenting the correlation between data provided by these SMART implants and clinical findings, including complications such as pedicle screw loosening and interbody cage subsidence.